Mitsubishi FX3UC Series, Руководство пользователя

Страница: 422 / 458

416
FX
3UC
Series Programmable Controllers
User’s Manual - Hardware Edition
A Version Information and Peripheral Equipment Connect ability
A-2 Programming Tool Applicability
Appendix A-2-5 Cautions on write during RUN
In FX
3UC
PLCs, write during RUN (program changes in the RUN mode) is enabled using the following
programming tools.
→
For the operating procedure of and cautions on write during RUN,
refer to the manual of the used programming tool.
Programming tools supporting write during RUN
Cautions on write during RUN
Programming tool Version Remarks
GX Developer
Ver.2.00A or later
Supports write during RUN in the instruction and device ranges in FX
2N
PLCs Ver.1.00 or later.
Ver.7.00A or later
Supports write during RUN in the instruction and device ranges in FX
2N
PLCs Ver.3.00 or later.
Ver.8.13P or later
Supports write during RUN in the instruction and device ranges in FX
3UC
PLCs Ver.1.00 or later.
Ver.8.18U or later
Supports write during RUN in the instruction and device ranges in FX
3UC
PLCs Ver.1.30 or later.
Ver.8.23Z or later
Supports write during RUN in the instruction and device ranges in FX
3U
and
FX
3UC
PLCs Ver.2.20 or later.
Ver.8.29F or later
Supports write during RUN in the instruction and device ranges in FX
3U
and
FX
3UC
PLCs Ver.2.30 or later.
FX-PCS/WIN
(-E)
Ver.1.00 or later
Supports write during RUN in the instruction and device ranges in FX
2
PLCs Ver.3.30 or later.
Ver.2.00 or later
Supports write during RUN in the instruction and device ranges in FX
2N
PLCs Ver.1.00 or later.
Ver.4.20 or later
Supports write during RUN in the instruction and device ranges in FX
2N
PLCs Ver.3.00 or later.
Item Caution
Program memories which can be written
in RUN mode Built-in RAM and optional memory cassette (whose write protect switch is
set to OFF)
Number of
program steps
which can be
written for circuit
change in RUN
mode
• GX Developer
Ver.8.23Z or later
Ver.2.20 or later
256 steps or less after edition (addition/deletion) (including NOP
immediately after circuit blocks except final circuit)
Ver.2.20 or less
127 steps or less after edition (addition/deletion) (including NOP
immediately after circuit blocks except final circuit)
• GX Developer
Ver.8.22Y or
former
• FX-PCS/WIN(-E)
127 steps or less after edition (addition/deletion) (including NOP
immediately after circuit blocks except final circuit)
Circuit blocks which cannot be written in
RUN mode
Circuit blocks in which labels P and I are added, deleted or changed in
edited circuits
Circuit blocks in which 1-ms timers (T246 to T249 and T255 to T511) are
added in edited circuits
Circuit blocks in which the following instructions are included in edited
circuits
• Instruction to output high speed counters C235 to C255 (OUT
instruction)
• SORT2 (FNC149), TBL (FNC152), RBFM (FNC278) and/or WBFM
(FNC279) instruction
Circuit blocks which require attention on
operation after write during RUN
Avoid write during RUN to a circuit block including the following
instructions during execution. If write during RUN is executed to such a
circuit block, the PLC decelerates and stops pulse output.
DSZR (FNC150), DVIT (FNC151), ZRN (FNC156), PLSV (FNC157)
instruction [with acceleration/deceleration operation], DRVI (FNC158)
and/or DRVA (FNC159) instruction
Avoid write during RUN to a circuit block including the following instruction
during execution. If write during RUN is executed to such a circuit block,
the PLC immediately stops pulse output.
PLSV (FNC157) instruction [without acceleration/deceleration operation]