Mitsubishi FX2N-16CCL-M, Руководство пользователя

Страница: 101 / 194

FX2N-16CCL-M CC-Link System Master Block Parameter Setting 7
7-5
7.3 Setting from Sequence Program
This section explains the parameter setting within the sequence program.
Parameters can be set using the following two methods:
1) Setting and operation using the buffer memory (Refer to subsection 7.3.1)
Use this method when starting up the system or when giving a change or addition to the
system after operation.
2) Parameter registration procedure to the EEPROM and operation based on parameters
registered in the EEPROM (Refer to subsection 7.3.2)
Registering parameters in advance to the EEPROM can save the parameter setting
program, and reduce the startup time.
[Caution]
The auxiliary relays in the non-keep area must be used as auxiliary relays (M) for parameter
setting programs.For the details, refer to 9.1.
7.3.1 Setting and operation using the buffer memory
K1 K4M20 HA K0 FROM
M0 PLS
M1 SET
MOV D0
MOV D1
MOV D2
K3 D0 H1 K0 TO
MOV D3
K1 D3 H6 K0 TO
MOV D4
K1 D4 H10 K0 TO
M0V D5
K1 D5 H14 K0 TO
MOV D13
K D13 H20 K0 TO
RST M1
M8000
Module error
M20
M35
RUN monitor
Module ready
M1
M1
M1
~
MOV D
Only when
required
Operation specification against
CPU down
Number of automatic return
modules
Number of retries
Number of connected modules
BFM#A
H
→
M35 to M20
Reserved station specification
Invalid station specification
Station information (set for
only connected modules)
M0