Mitsubishi F940GOT-LWD-E, Руководство по эксплуатации

Страница: 112 / 300

Graphic Operation Terminal F940GOT Other Mode 8
8-2
8.2 SET TIME SWITCH
Set the time switch using the clock function built in the GOT.
This function turns on up to 8 consecutive bit devices during the set time when the specified
day of the week and the time have come.
Target bit devices can be specified using the screen creation software FX-PCS-DU/WIN-E.
u u u u
Basic operation
Day of the week : Select desired days of the week by pressing them."
l
" is added to selected
days of the week.
When a day of the week marked with "
l
" is pressed again, selection is can-
celed.
START TIME : Set the time at which the specified bit devices become ON. The devices will
remain ON from the start time to the end time on the selected days of the
week.
END TIME : If the end time is earlier than the start time, the specified bit devices remain
ON until the following day (even if the following day is not selected).
a) Target bit devices
Specify up to 8 consecutive devices.
• In the setting on the screen 2, (CH1) M100 will remain ON from 10h 11m 12s to 10h 12m
12s on Monday to Friday.
The OTHER MODE
screen is displayed. The channel setting
screen is displayed.
CH1 to CH8
Paragraph 8.1
Select channels
(= bit devices)
1 to 8 to be set.
SET TIME SWITCH
Select "SET TIME
SWITCH" on the
screen.
Screen 1 Screen 2
[ SET TIME SWITCH ] END
[ CHANNEL ]
SUN
Screen2
CH1:
START TIME
10h 11m 12s
10h 12m 12s
END TIME
MON TUE WED THU FRI SAT
5
0 6
1
2 3 4
7 8 9 - CLR
ENT
CH4 CH8
[ SET TIME SWITCH ] END
CH1 a)
[ OTHER MODE MENU ]
CH2
CH3
CH5
CH6
CH7
< Example >
Screen1