Mitsubishi F940GOT-LWD-E, Руководство по эксплуатации

Страница: 289 / 300

Graphic Operation Terminal F940GOT Additional Functions (in Ver. 3.00 or Later) 14
14-13
• Printing is performed at the following timing.
*1 If a printing start command is given while printing is performed, it is ignored and new
printing is not performed.
• Sequence program example
In the program below, a start trigger and an abortion trigger are used.
Start trigger: Assigned to M100
Abortion trigger: Assigned to M101
Start trigger or start
touch switch
Printing is started.
Hard copy output
signal ON
Abortion trigger or
abortion touch switch
D24 b7 ON
Printing is performed.
Printing is
performed.
Printing is
aborted.
*1
M8000
MOV D24 K2M50
Start
command
SET M100
M57
M57
Abortion
command
SET M101
M57
RST M100
RST M101
M57
D24 b0 to b7 (write device) are transferred to
M50 to M57. •
• The start trigger M100 becomes ON.
• When M57 becomes ON and printing is
started, the start trigger M100 becomes
OFF.
• The abortion trigger M101 becomes ON.
• When M57 becomes OFF and printing is
aborted, the abortion trigger M101 becomes
OFF.