Mitsubishi Heavy Industries SRRM40HENG-L, Руководство пользователя

Страница: 247 / 1106

SCM-C
245
21˚C
≤
Room temperature<26˚C 26˚C
≤
Room temperature
Operation Mode Dry Cooling
(2) Back-up Switch
When the remote controller batteries become weak, or if the remote controller is lost or malfunctioning, this switch may be used to
turn the unit on and off.
(a) Operation
Push the switch once to place the unit in the automatic mode. Push it once more to turn the unit off.
(b) Details of operation
The unit will go into the automatic mode in which it automatically determines, from room temperature (as detected by
sensor), whether to go into the cooling, thermal dry or heating modes.
Function
Room temperature
Operation mode
setting
Fan speed Flap Timer switch
Cooling About 26˚C
Thermal dry About 25˚C Auto Natural flow Continuous
Heating About 25˚C
On operating in automatic operation mode by back-up switch, functions shown in the above table are not altered, white, the other micro-
computer control functions remain effective.
(3) AUTOMATIC operation
(a) When starting operation after more than 1 hour since operation stops
(Operation stop button ON or ON-Timer), this system operates indoor fan with Lo for 20 seconds checks room temperature
and allowing decision of operating mode automatically.
Note (1) Operating Mode is not altered due to change of room temperature.
When intended to change operating mode, switch operation change over dial to the intended mode.
(b) Established temperature (operate by the established temperature button on remote controller).
Wireless remote control signal (Indication)
-6 -5 -4 -3 -2 -1
±
0 +1 +2 +3 +4 +5 +6
Cooling 20 21 22 23 24 25 26 27 28 29 30 31 32
Thermal dry 19 20 21 22 23 24 25 26 27 28 29 30 31
Temperature
setting
= =
ON/OFF
Back-up switch
(b) Memory flap
While the flap is operating if the AIRFLOW button is pushed once,
it stops swinging at an angle.
As this angle is memorized in the microcomputer, the flap will be automatically
set to the angle when next operation is started.
(c) Swing flap
Flap moves in upward and downward directions continuously.
COOL DRY Horizontal
blowing
• Recommendable stopping angle of the flap