Mitsubishi Electric CC-Link IE-NZ2GNSS2-16DTE, Руководство пользователя

Страница: 150 / 170

148
APPX
Appendix 4 Remote Buffer Memory
■
Output dark test pulse OFF time setting
Set the width of OFF pulses used for an output dark test in units of 1 point.
• When "Wiring selection of output" is set to "0: Not used" or "Output dark test execution setting" is set to "1:
Do not perform", the points with those settings ignore this setting value.
• When "Wiring selection of output" Yn (n: even number) is set to "1: Safety double wiring (Source/Source)",
set the same value for "Output dark test pulse OFF time setting" Yn and Yn+1, the partner of Yn.
■
Number of pulse output for output dark test
Set the number of pulse output for output dark test in units of 1 point.
• When "Wiring selection of output" is set to "0: Not used" or "Output dark test execution setting" is set to "1:
Do not perform", the points with those settings ignore this setting value.
• When "Wiring selection of output" Yn (n: even number) is set to "1: Safety double wiring (Source/Source)",
set the same value for "Number of pulse output for output dark test" Yn and Yn+1, the partner of Yn.
■
Fast logic pattern setting
Set the logic patterns for the fast logic function.
When "Fast logic pattern setting" is set to "0: Not used", the fast logic function is disabled.
■
Fast logic interlock mode setting
When the fast logic function is enabled, set whether to perform output point interlock when the output is turned off.
When "Fast logic pattern setting" is set to "0: Not used", this parameter is ignored.
Module Address (hexadecimal) Name Setting range Default value
Input module

Output dark test pulse OFF time setting
Y0 to Y7 0: 400

s
1: 1ms
2: 2ms
0: 400

s
Output module 01A0H to 01A7H
I/O combined module 01A0H to 01A7H
Module Address (hexadecimal) Name Setting range Default value
Input module  Number of pulse output for output dark
test Y0 to Y7 0: 1 time
1: 2 times
2: 3 times 0: 1 time
Output module 01B0H to 01B7H
I/O combined module 01B0H to 01B7H
Module Address (hexadecimal) Name Setting range Default value
Input module  Fast logic pattern setting 0: Not used
1: Pattern 1
2: Pattern 2
3: Pattern 3
4: Pattern 4 0: Not used
Output module

I/O combined module 01D0H
Module Address (hexadecimal) Name Setting range Default value
Input module  Fast logic interlock mode setting 0: Enable
1: Disable 0: Enable
Output module 
I/O combined module 01D1H