Mitsubishi Electric CC-Link IE-NZ2GNSS2-16DTE, Руководство пользователя

Страница: 124 / 170

122
10 TROUBLESHOOTING
10.7 List of Error Codes
Detailed information
■
External power supply voltage error (error code: 0102H)
An external power supply status (normal or error) is stored in Detailed information 1.
• 0H: Normal
• 1H: Error
■
Output read-back error (error code: 0106H)
Output read-back error detection point information is stored in Detailed information 1.
• Detailed information 1
■ Output dark test error (error code: 0107H)
The diagnostic result of an output dark test (normal or error) is stored in Detailed information 1.
• Detailed information 1
■
Module power supply voltage error (error code: 0109H)
A module power supply voltage error status is stored in Detailed information 1.
*1
• 0H: Undervoltage
• 1H: Internal circuit error
*1 Only for the module with the firmware version of "01"
■
Remote buffer memory access error (error code: 0201H)
The start address of a remote buffer memory area that was accessed using the REMFR/REMTO instruction is stored in
Detailed information 1 and Detailed information 2. The lower 16 bits are stored in Detailed information 1 and the upper 16 bits
are stored in Detailed information 2.
For details on the remote buffer memory addresses, refer to the following.

Page 138 Remote buffer memory list
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
0 (fixed) Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
0: Normal
1: Error
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
0 (fixed) Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
0: Normal
1: Error