138
APPX
Appendix 4 Remote Buffer Memory
Appendix 4
Remote Buffer Memory
Remote buffer memory is divided into a parameter area, monitor area, and module control data area for each address.
The initial value is set in remote buffer memory at power-on or hardware reset.
Do not read/write data from/to a use prohibited area of remote buffer memory. If data is read or written, the
correct operation of the safety remote I/O module cannot be guaranteed.
Remote buffer memory list
The remote buffer memory list of the safety remote I/O module is shown below.
The remote buffer memory of the safety remote I/O module is allocated as follows.
Parameter area
Parameters can be set in these areas using the parameter setting window of the engineering tool. Parameters cannot be set
using the program.
If these parameters are changed, the safety module valid flag (RWr0.b0) turns OFF and the safety remote I/O module enters
the standby mode.
For details on the standby mode, refer to the following.
Page 31 Operation mode and state transition
• Always use the engineering tool to set parameters.
• When a use-prohibited area is read from/written to, the dedicated instruction is completed successfully.
■
Parameter data per station
: Enabled,
: Disabled
Remote buffer memory address
Area
Target
Decimal
Hexadecimal
0 to 255
0000H to 00FFH
Parameter area
Parameter data per station
256 to 511
0100H to 01FFH
Parameter data per module
512 to 1279
0200H to 04FFH
Use prohibited
1280 to 2559
0500H to 09FFH
Monitoring area
Use prohibited
2560 to 5375
0A00H to 14FFH
Module control data area
Use prohibited
Address
Name
Default
value
Read
Write
Decimal
Hexadecimal
0
0000H
Safety setting
Transmission interval monitoring
time
35
1
0001H
I/O LED indication setting at error
occurrence
0
2
0002H
Safety approval code
FFFFFFFFH
3
0003H
4 to 10
0004H to 000AH
Use prohibited
11
000BH
Communication speed setting
0
12 to 255
000CH to 00FFH
Use prohibited
Содержание CC-Link IE-NZ2GNSS2-16DTE
