Minebea Intec PR 5220 Series, Инструкция по эксплуатации инструмента

Страница: 66 / 235

7.8 Resetting the network address
The instrument can be reset using a pin with a diameter of approx. 1.0 mm (e.g. paper
clip).
Holding down the reset key (1) for a longer period [wait until the 3 upper LEDs (2) are all
on] resets the network settings to default/factory settings.
This means
- "DHCP" will be activated.
- "Hostname" is initialized to, e.g. PR 5220-6B6A5E (type MAC-ID).
Example of MAC ID: 00-90-6C-6B-6A-5E
This ensures that a valid address for identification of the instrument in the network can be
assigned to the instrument from a server, see also Chapter
7.15.4 .
Note:
The last 3 bytes of the MAC ID are displayed. A label with the complete MAC ID is located
on the outside of the device.
If the device connected to an IT network (company network) with an DHCP server and
was activated under - [Network parameter] of the "Use DHCP" parameter (default/
factory setting), it does not require further actions except for a 2 3-minute waiting time.
Subsequently, a network connection is established automatically (device <->
workstation/PC).
7.9 Operation using VNC
VNC (on the enclosed CD-ROM) stands for "virtual network computing" and is a program
for remote operation of computers.
7 Commissioning Transmitter Series PR 5220
EN-63 Minebea Intec