Mindray Anesus ME7T, Руководство оператора

Страница: 186 / 312

13 - 4 Operator’s Manual
13 Measurement, Comments and Body Mark
If needed, tap [Advanced Settings] to enter comment property screen to set the arrow style/
size.
3. Press <Set> to anchor the arrow position.
Repeat steps above to add more arrows if necessary.
4. Press <ABC> or the user-defined key for “Arrow” to exit the arrow comment status.
Trace
In comment status, tap [Advanced Settings] > [Trace] on the touch screen to activate trace function,
and the current image is also displayed on the touch screen.
Using the control panel:
1.
Use the trackball/trackpad to move the cursor to a desired position, and press <Set> to confirm
the start point.
2. Use the trackball/trackpad to move the cursor along the edge of the desired region and trace the
outline of the region.
– Rotate the <Angle> knob counter-clockwise to cancel 1 pixel of trace.
– Rotate the <Angle> knob clockwise to restore 1 pixel of trace.
– Short press <Clear> to clear last trace. Long press <Clear> to delete all tracing.
3. Press <Set> to finish the tracing.
Using the touch screen:
1.
Trace around the ROI by taping the touch screen image using your finger.
2. Remove your finger to finish the tracing.
– [Clear]: tap to delete the trace in reverse order one by one.
– [Clear All]: tap to delete all traces.
3. Tap [Exit] to exit the tracing.
13.2.2 Moving Comments
TIP:
If image size and position changed due to display format switching, then the position of the
comment can be changed, too.
Perform the following procedure:
1.
Select the comment to be moved.
2. Use the trackball/trackpad to move the comment to the new position.
3. Press <Set> key to anchor the comment in the new position, and the comment-moving
operation is complete.
13.2.3 Editing Comments
Modifying characters
Perform the following procedure:
1.
In comment status, move the cursor onto the comments to be modified.
Press alphabetic keys to enter the character to the cursor position directly.