Page 74 of 113
In the
Configuration
menu, turn and press the control knob to select
Methods
Transfer.
•
If the communication hub is not connected to an active network or directly
to the computer using the network cable or to a USB flash drive, the
following
Methods Transfer
screen displays:
•
If the communication hub is connected to an active network or directly to
the computer using the network cable or to a USB flash drive, the following
Methods Transfer
screen displays:
Transfer Using a Network Cable
To transfer test methods from the Steritest
®
Symbio Software to the pump using
a network cable:
1.
Ensure that the communication hub is connected to an active network or
directly to the computer (see
).
Direct connection between pump and computer
:
