Page 61 of 113
Once the waste receptacle is emptied or replaced, the red waste overfill sensor
icon no longer displays on the Test Method mode screen and the orange LED no
longer lights up on the waste overfill sensor.
Entering Standby Mode
If no action is performed on the Steritest
®
Symbio Pump for 15 minutes while the
pump head is open, the pump enters in standby mode.
The screen saver is displayed on the pump with the following message: “Press the
knob to wake me up or shut me down.”
The default screen saver image is a black-
and-white version of the Steritest
®
devices graphic. This can be replaced with a
custom image (See the
Steritest
®
Symbio Software User Guide
).
To exit standby mode, press the control knob.
NOTE
If no action is performed for 60 minutes while the pump head is open, the
pump switches off automatically.
Switching Off the Pump
To switch off the pump:
Press and hold the
button on the control panel for a few seconds. The
following screen displays, followed by the screen with the view of the Steritest
®
devices range or the custom image if one has been added:
NOTE
When the pump is switched off, the pump head remains in its current
position. After the pump is switched off, the cover can be removed only if
the pump head was open when the pump was switched off.
If the pump will not be used for an extended period, or if maintenance is
required, switch off the main power supply using the main on/off switch
(position Ο) on the front of the communication hub and disconnect it from
power source.
