Page 22 of 113
Installing the Pump in the Work Environment
LFH version
1.
Clean the pump and accessories. See
.
2.
Place the pump and accessories in a laminar flow hood on a flat, stable, and
horizontal surface.
NOTE
To optimize working comfort, place the pump 160 mm (6.3 in.) from the
front edge of the hood bench.
The communication hub is not intended to be placed in the laminar flow
hood. To fix the communication hub to one of the laminar flow hood feet,
use the optional communication hub holder for hoods (see
The Steritest
®
Symbio LFH pump can also be used inside an isolator, using
the Steritest
®
Symbio connection cable extension with Tri-Clover clamp
and the Steritest
®
Symbio feet for use in isolator (see
ISL version
Refer to the
Steritest
®
Symbio ISL Pump Installation Guide
(PF16599). To
access this document, go to
www.millipore.com/steritest-symbio
.
FLEX version
Refer to the
Steritest
®
Symbio FLEX Pump Installation Guide
(PF17222). To
access this document,
go to
www.millipore.com/steritest-symbio
.
Installing the Communication Hub
NOTE
The communication hub is equipped with specific fuses to protect the pump
components in case of overload:
·
One T 6.3A L 250V fuse at the front
·
Two T 3.15A L 250V fuses at the rear
To order spare fuses for the Steritest
®
Symbio communication hub, see
