Midas PRO6, Руководство пользователя

Страница: 48 / 614

22
Chapter 3: About The PRO6 Control Centre
PRO6 Live Audio System
Owner’s Manual
External interfaces and peripheral devices
Various devices can be used with the PRO6, such as:
• External USB mouse: Instead of using the primary navigation zone to operate
either of the GUI screens, you can use an external USB mouse. This can be plugged
into any of the USB connectors on the PRO6. The USB mouse behaves in the same
way as any PC mouse. For more information, see “Using an external USB mouse” on
page 323.
• External USB keyboard: A USB keyboard can be used to operate either of the GUI
screens. For more information, see “Using a USB keyboard” on page 323.
• MIDI: Standard 5-pin connectors are housed in the rear panel for use as MIDI in,
out and through ports. These are fitted on the DL351 Modular I/O units and,
therefore, are available at both the FOH and the stage locations.
• USB: Host and slave USB ports are provided on all units and are, therefore, available
at the FOH and stage locations. In addition, the PRO6 provides USB host ports (left
of GUI screens) for keyboard, mouse and removable storage (memory stick).
• External monitor: The control centre has high density D-type connectors on the
rear panel of the PRO6 that carry VGA signals for external monitor connection. For
more information, see “Using an external monitor” on page 323.
• HELIX auto solo: Provided by means of the Ethernet connections on the routers.
Solo tracking system (STS) is only available by using a Klark Teknik HELIX RapidE.
The console sends solo messages to the RapidE, which then pages to the console.
• Remote GEQ operation: A Klark Teknik HELIX RapidE can be used to remotely
control the GEQs of the PRO6.
• Network inter-operability: A port on the router is for general ‘rest of the world’
Ethernet traffic. This port is isolated from the PRO6 Control Centre’s Ethernet traffic
by a routing table gateway mechanism within the router itself.
Mix buses
To help reduce latency the PRO6 has only four time zones for the primary channel
types, with the interconnecting buses being restricted to the intervening time. The time
zones and their channel associations are as follows:
• First time zone: Input channels, including aux inputs set to input channel mode.
• Interval between first and second time zones: Aux bus.
• Second time zone: Aux Channels, including aux inputs that are set to effects
return mode.
• Interval between second and third time zones: Master bus.
• Third time zone: Master outputs.
• Interval between third and fourth time zones: Matrix bus.
• Fourth time zone: Matrix outputs.
This differs from traditional analogue consoles, where it is often possible to mix four or
five times through a system, as latency is not an issue. However, this system has the
advantages of being able to route directly from inputs to matrix output — one bus to
another — and offering more flexible bus types (stereo, mono, aux, sub, mix minus
etc.).
In this system, all inputs are automatically time aligned, so there is no comb filtering,
which is often a problem with other digital consoles.
For details of the bus types and their options, see Table 21 “Definition of primary
buses” on page 375.