manualshive.com logo in svg

Midas PRO6, Руководство пользователя

Поделиться
Скачать
Midas PRO6 Скачать руководство пользователя страница 388

362

Appendix G: Troubleshooting

PRO6 Live Audio System

Owner’s Manual

b

bad device

File and 
Automation

Operation could not be 
carried out because the 
device, that is, the internal 
compact flash of the PRO6 or 
USB memory stick (if 
connected), does not contain 
the required directory 
structure.

• If the device is the internal 
compact flash of the PRO6, 
this could be an indication of 
a serious problem.  Contact 
Midas Technical Support.
• If the device is the USB 
memory stick, check that the 
device has not been 
disconnected from the control 
surface.

bad device ID

File and 
Automation

The device identifier has not 
been recognised.

If you are exporting a file to a 
USB memory stick, check 
that it has not been 
disconnected from the control 
surface.

bad directory

File and 
Automation

The file system path does not 
terminate in a directory.

This is highly unlikely to occur 
in practice, but is an 
indication of a serious error.  
Contact Midas Technical 
Support.

bad file

File and 
Automation

The file system path does not 
terminate in a file.

This is highly unlikely to occur 
in practice, but is an 
indication of a serious error.  
Contact Midas Technical 
Support.

bad file artefact

File and 
Automation

The file has been detected as 
not valid.  Preferences, preset 
library and show files are 
validated by comparing their 
actual attributes against the 
corresponding fields stored in 
the header of the file, such 
as, file size, checksum etc.

Try again.
If still unsuccessful, and if the 
file is a show file, try a 
backup file, if one is 
available.

bad file version

File and 
Automation

The preferences, preset 
library or show file could not 
be opened because its file 
header version field was not 
valid.

Try again.
If still unsuccessful, and if the 
file is a show file, try a 
backup file, if one is 
available.

bad path

File and 
Automation

A file or directory is missing.

This is an indication of a 
serious error.  Contact Midas 
Technical Support.

bad point scene 
ID

File and 
Automation

The scene’s point scene ID 
cannot be found.

Try again.

Error Message

System(s)

Problem

Solution

Содержание PRO6







































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды