Midas PRO6 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 614

Midas PRO6 Скачать руководство пользователя страница 33

Applications

7

PRO6 Live Audio System
Owner’s Manual

• Latency — Low and managed latency through the system. Minimal latency and

fully time aligned.

• Cabling — Cat 5e or fibre optic snakes. Standard system has reduced cabling as

compared to any other available solution.

• System design and network:

• Integrated open-architecture AES50 digital audio distribution.

• Up to 100 metres (Cat 5e) or up to 500 metres (optical fibre) of dual redundant

connectivity between hardware elements.

• Automatic integral delay management system - audio outputs time and phase

coherent.

• Flexible, expandible hardware system includes analogue and digital I/O options

for flexible system integration.

• Ethernet TCP-IP and USB tunnelling for third parties.

• KVM (keyboard, video and mouse) switching on control centre.

• Fast flexible audio and control system architecture.

• Modular digital and analogue I/O options.

• Advanced automation and system operating preferences.

• PRO6 is flexible and the system can be customised with the needs of the install.

• VGA outputs for additional screens.

• Reliability — High reliability with some redundancy and other back up

contingencies.

• Failure-tolerant of any single failure of hardware or software.

• Proven, stable Linux operating system.

• Dual redundant control surface master controllers and PSUs.

• Duplicated (N+1) network for redundancy.

• Control centre has triple redundant power supplies.

• DL351 Modular I/O (stage box) has dual redundant power supplies.

• DL371 Audio System Engine (stage box) has N+1 (optional) modules with three

(N+1) power supply units (PSUs).

• Service and support — 24/7 global telephone support. Service/support centres in

US, UK and Singapore.

Applications

The PRO6 is the ‘work horse’ mid- to high-end Midas Digital Console System, akin to the
‘industry standard’ Heritage 3000. Although the PRO6 is designed for the traditional
touring live sound environment, it is also ideal for medium-sized theatre, small house of
worship installations and broadcast. So, being a truly multi-function console in the
Midas tradition, the PRO6 is suitable for many applications, such as:

• Live sound touring MON or FOH duties.

• Live sound small theatre MON or FOH duties.

• Live sound house of worship MON or FOH duties.

• Live sound broadcast mixer with basic 5.1 surround capabilities and monitoring.

«
...
31
32
33
34
35
...
»

Содержание PRO6







































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды