manualshive.com logo in svg

Midas PRO6, Руководство пользователя

Поделиться
Скачать
Midas PRO6 Скачать руководство пользователя страница 287

Channel configuration controls

261

PRO6 Live Audio System
Owner’s Manual

Channel configuration controls

There are a number of input channel controls that are loosely termed ‘channel 
configuration’ controls.  These comprise:

• Input channel ID (GUI only): name and identification.  Both the name and colour 

of the name field are user-configurable.  For details, see “Input channel ID (GUI 
only)” on page 262.

• Input channel source (GUI only): shows where the input is routed (patched) 

from, that is, the physical location the input channel is notionally getting its audio 
from, and provides direct access to the Patching screen.  For details, see “Input 
channel source select (GUI only)” on page 262.

• Gain swap: swaps from remote (stage box) gain to digital trim (console gain), and 

vice versa.  For details, see “Mic amp input gain (preliminary input processing)” on 
page 264.

• Stereo linking: links adjacent channel for stereo operation.  For details, see “Stereo 

linking (GUI only)” on page 263.

• Input channel direct output: routes signal path from a selected point to an I/O.  

For details, see “Direct output” on page 267.

• Input channel safes: has safe switches that protect specific controls from being 

changed by the automation system.  For details, see “Safes” on page 263.

• Gain and filter: mic amp input gain.

• Inserts: allows configuration of the send and return points when an insert is used.

• Input channel delay (GUI only): user-defined delay to be added to the input 

signal processing.  For details, see “Input channel delay (GUI only)” on page 262.

• Processing order: selects whether the EQ or the dynamics comes first in an input 

channel’s signal path.

Their control is divided between control centre and GUI, although some are GUI only.  
All of them are in the configuration processing area, with the exception of the inserts, 
which have their own processing area (see Figure 32 “Processing areas available from 
the input channel overview display” on page 259).

Содержание PRO6







































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды