manualshive.com logo in svg

Midas PRO6, Руководство пользователя

Поделиться
Скачать
Midas PRO6 Скачать руководство пользователя страница 149

123

PRO6 Live Audio System
Owner’s Manual

Chapter 13: Muting

You can interrupt (mute) the output signal of a channel. This is generally used for 
backstage mics, guitar switch over etc.  Channel mutes can be activated by any of the 
following, which (except the VCAs) mute the channel outputs and update the channel 
mute status indicator:

• Local 

MUTE

 button press.

• Auto-mutes (mute groups/control groups) — see “Auto-mute (mute) groups” on 

page 161.

• VCAs — see “VCA and POP groups” on page 157.

• Scene recall (automation) — see Chapter 30 "Automation" on page 391.

• SIP — see “Solo in place (SIP)” on page 121.

To see which outputs are affected by channel muting, refer to Appendix 2 “Functional 
Block Diagrams”.

Figure 17: Control methods, interactions and corresponding states of channel mute

Note: 

In Figure 17, all of the transitions between states, with the exception of State 1 

to State 0 “If not SIP muted”, are events.  The “If not SIP muted” transition is not an 
event, it happens as soon as the indicated test condition (“If not SIP muted”) is true.

  

Also, “Mute on” and “Mute off” refer to mute activations and deactivations using the 
local 

MUTE

 button press method; SIP mutes only apply to input channels (the “If not 

SIP muted” exit condition from State 1 is always true for other channel types).  An 
“auto-mute on” and “auto-mute off” are achievable in several different ways.

Содержание PRO6







































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды