manualshive.com logo in svg

Microscan EZ Match, Руководство пользователя

Поделиться
Скачать
Microscan EZ Match Скачать руководство пользователя страница 161

EZ Match User’s Manual

7-11

Symbologies

EAN-128 Status (Code 128 / EAN-128)

Output Format

 

(Code 128 / EAN-128)

Application Record Separator Status

 

(Code 128 / EAN-128)

Definition:

When this field is disabled, the imager will not check any Code 128 labels 
for conformance to EAN requirements, or perform any special formatting.
When enabled, the imager can read symbols with or without a function 1 
character in the first position. If a symbol has a function 1 character in the 
first position, it must conform to EAN format. Symbols that conform to EAN 
format will also be subject to the special output formatting options available 
in this command.

Note:

 Code 128 status must be enabled for EAN status to be active.

If EAN status is required, the imager will only decode symbols that have a 
function 1 character in the first position and that conform to EAN format. All 
symbols read will be subject to the special output formatting options available 
in this command.

Note:

 Code 128 status must be enabled for EAN status to be active.

Serial Cmd:

<

K474,

status,fixed symbol length status,fixed symbol length,

EAN-128 status

, 

output format,application record separator status,application record separator 
character,application record brackets,application record padding

>

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

2 = Required

Definition:

In 

Standard

, the imager will not apply special EAN output formatting 

options.
In 

Application

, the imager will apply the special EAN output formatting 

options to decoded EAN-conforming symbols.

Serial Cmd:

<

K474,

status,fixed symbol length status,fixed symbol length,EAN-128 status, 

output format

,application record separator status,application record separator 

character,application record brackets,application record padding

>

Default:

Standard

Options:

0 = Standard

1 = Application

Definition:

When enabled, an EAN separator will be inserted into the output between 
fields whenever an EAN-conforming symbol is decoded and EAN output 
formatting applies.

Serial Cmd:

<

K474,

status,fixed symbol length status,fixed symbol length,EAN-128 status, 

output format,

application record separator status

,application record separator 

character,application record brackets,application record padding

>

Default:

Disabled

Options:

0 = Disabled

1 = Enabled

Содержание EZ Match
















































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды