Micromeritics AccuPyc 1330, Руководство оператора

Страница: 37 / 115

Entering Commands
The pycnometer remains in display mode until you enter a command by
pressing the appropriate keys on the keypad. Commands start an analysis or
other automatic operations and allow you to modify operating parameters.
The commands available are:
Perform an Analysis
Review and Edit Analysis or Calibration Data
Print or Transmit Reports
Calibrate the Pycnometer
Zero the Pressure Transducer
Edit Set-Up Parameters
Manually Control the Valves
You may not enter a command (other than Print or Transmit) while an
automatic operation is in progress.
When you enter a command, most functions will display prompts. A prompt
is a request for you to enter information. A prompt generally contains two
lines. The first line contains a description of the requested information and
the second line displays a default value (when applicable). To use the default
value, just press the
key. For example, when you press
the following prompt is displayed:
To select analysis parameters, which is the default value, press .
If you do not wish to use the default value, you can use the keypad to enter
other responses. There are two types of prompts: data entry and multiple
choice. Prompts that require you to enter data are followed by a colon (:).
Use the keypad to enter the desired value, then press
. If you enter an
invalid value, you will hear a beep. Try again.
Multiple choice prompts contain a fixed set of responses and are followed by
a question mark (?). To select a multiple choice response, press
until
the desired value is displayed, then press .
At any time while entering information you may:
Press to save the information you entered and return to display mode.
Press to delete the information you entered and return to dis-
play mode.
ENTER
2
Setup type?
Analysis parameters
ENTER
ENTER
CHOICE
ENTER
SAVE
CLEAR
Default Value
Description of Requested Information
AccuPyc 1330 Entering Commands
September 1996 4-5