Micromeritics AccuPyc 1330, Руководство оператора

Страница: 30 / 115

Starting an Analysis
Using the Default Parameters
To start an analysis using the analysis and report parameters shipped with the
pycnometer:
1.
Press .
2. The following prompt is displayed:
Press to begin the analysis.
Using Modified Analysis Parameters
To start an analysis using analysis parameters that have been modified:
1.
Press .
2. The following prompt is displayed if Sample ID was enabled in the Re-
port Options function.
Using sample IDs can help you keep track of data from various analyses.
You may, for example, use the sample ID as a date and time stamp. The
sample ID can contain from 1 to 20 numbers and dashes.
Enter the sample ID and press .
3. The following prompt is displayed if density was selected for Analysis
display mode in the Report Options function.
Enter the sample weight and press . The range of valid entries is
000.0000 to 999.9999 g.
4
[Enter] to start
[Escape] to cancel
ENTER
4
Sample ID:
ENTER
Sample Weight:
ENTER
Starting an Analysis AccuPyc 1330
3-4 September 1996