Wall formwork
Mammut 350
Column formwork – With column panels and access platform
Fig. 55.4
Fig. 55.2
Fig. 55.1
Fig. 55.3
Detail A
Detail A
The perforated profile is used
to precisely set the rectangular
(Fig. 55.1) or square (Fig. 55.2)
column cross sections in incre-
ments of 5 cm up to a maximum
cross section of 105 cm by
105 cm.
The column panels are con-
nected with each other using
tensioning screws (Figures 55.3
and 55.4) and flange nuts or
articulated flange nuts.
Flange nut
Tensioning screw
M column panel
105
105
M350-55
Technical Instruction Manual / Status November 2018
