Wall formwork
Mammut 350
All panels are provided with
multi-function profiles with
welded-in Dywidag-threaded
nuts (Fig. 12.1). The difference
between the multi-function
profiles and the cross stiffeners
is that the multi-function profiles
allow accessories to be attached.
Walkway brackets are provided
with integrated self-locking pins
(Fig. 12.2). and are mounted on
the multi-function profiles and
secured with a flange screw 18.
Formwork is set vertically using
push-pull props attached to the
panel with formwork-prop con-
nectors as shown in Fig. 12.4.
Alignment rails should be
attached to the multi-function
profiles with flange screws in
order to
•
stabilise ganged pan-
els when lifting them by crane
•
bridge problem areas
•
brace and stabilise
the fillers used to bridge gaps
between the panels
The tie rod holder can be
attached to the multi-function
profile of the vertical or hori-
zontal panel. It can hold up to
two DW tie rods with articulated
flange nuts (Fig. 12.5).
Fig. 12.1
Fig. 12.2
Fig. 12.3
Fig. 12.4
Fig. 12.5
Attachment of accessories
Fig. 12.6
Description
Ref. No.
Tie rod holder .......................
29-927-10
M350-12
Technical Instruction Manual / Status November 2018
