Wall formwork
Mammut 350
Fig. 4.1
Tie hole with conical anchor
sleeve (see page M350-8).
Fig. 4.2
Panel connection with the M
assembly lock (see page M350-
7).
Fig. 4.3
Cross stiffener made of sturdy
closed steel profile.
Fig. 4.4
Quick and secure attachment
of accessories using welded-in
DW 15 threaded nuts (see page
M350-12).
Fig. 4.5
Transport hole to attach the
crane slings 60, allowing for
fast loading and unloading of
panel stacks or moving them at
ground or slab level (see pages
M350-66 and -67).
Fig. 4.6
The steel frames are made of
closed hollow profiles with
welded-in mitred joints. The pro-
files are provided with a groove
and edge protection. Panels
with a width of 125 and 250 cm
are equipped with four bump
notches that are diagonally
welded in, allowing exact panel
positioning without a hammer.
Note
For a list of the available panels
including their designations and
reference numbers refer to the
Product List.
The Mammut 350 panel
Fig. 4.1
Fig. 4.2
Fig. 4.3
Fig. 4.4
Fig. 4.5
Fig. 4.6
M350-4
Technical Instruction Manual / Status November 2018
