Wall formwork
Mammut 350
Stripping corner
The M stripping corner can also
be used as a stripping support
for panels between corners
inside a room. In this case,
the stripping corner is used to
reduce the tension between the
panels so that they can easily be
removed from the poured wall
between the corners.
Steps
1. Remove the M assembly locks
connecting the stripping corners
to the panels (Fig. 34.1).
2. Activate the M stripping
corner (Fig. 34.2 and pages
M350-31 to -33).
3. Lift the stripping corners off,
then strip the panels (Fig. 34.3).
Fig. 34.1
Fig. 34.2
Fig. 34.3
M stripping corner has been
activated
M350-34
Technical Instruction Manual / Status November 2018
