Mercedes-Benz SLR McLaren Stirling Moss, Руководство пользователя

Страница: 137 / 385

136
Controls in detail
On-board computer
Setting the constant headlamp mode
If you have set constant headlamp mode
and the light switch is in position
M
, the
side lamps, dipped-beam headlamps and
licence plate lighting are switched on auto-
matically when the engine is running. Turn-
ing the light switch to a different position
switches on the corresponding lights.
In countries in which constant headlamp
mode is a legal requirement,
Constant
is
the factory setting.
왘 Move the bar to the
Lighting
sub-
menu using the
æ
or
ç
button.
왘
Press the
‚
or
ƒ
button repeat-
edly until the following message ap-
pears in the left-hand multi-function
display:
Light circuit Headlamp
mode
.
The current setting is highlighted.
왘
Select whether you wish to operate the
lighting manually or whether you wish
to set constant headlamp mode by
pressing the
æ
or
ç
button. This
does not apply in countries in which
there is a legal requirement to use con-
stant headlamp mode.
For safety reasons, it is not possible to re-
set the
Light circuit Headlamp mode
function to the factory setting while the ve-
hicle is in motion. You will see the following
message in the right-hand multi-function
display:
Cannot be fully reset to fac-
tory settings while driving
.
Setting the locator lighting
If you switch on the locator lighting, the fol-
lowing light up after you have unlocked the
vehicle using the remote control:
앫
The side lamps
앫 The tail lamp
앫
The licence plate illumination
The locator lighting automatically switches
off when you open the driver's door or after
40 seconds.
왘
Move the bar to the
Lighting
sub-
menu using the
æ
or
ç
button.
dc_BA.boo Seite 136 Mittwoch, 20. Mai 2009 10:17 10