Memjet MACH X, Руководство оператора

Страница: 10 / 125

SECTION 1
GETTING ACQUAINTED
4
Ink Tank View
1.
Cutting Blade Assembly – Used to cut the media web.
2.
Ink Tank Latches – Used to hold the Ink Tanks in the slots.
NOTE : Please be sure that both sides, at the bottom part of the latch, are engaged.
3.
Ink Tank Dock – Holds the 5 Ink Tanks. (Ink Tanks shown installed).
4.
Waste Ink Tray – The purpose of this tray is to catch any waste ink produced by the system.
This tray is filled with absorbent material.
The tabs located at the left and right sides of the tray; secure the tray to the print engine frame.
Please be sure the tabs “click” into the frame to secure the tray’s position.
Please inspect tray routinely and replaced when necessary.
5.
Service Station Dock – The Service Station is located here. The Service Station keeps the
Printhead clean and hydrated during operation and maintenance cycles.