SECTION 2
INSTALLING THE PRINTER
19
Connecting to the Computer
The Printer connects to the computer through the USB port
[3]
.
A Network port
[2]
is provided when operating in a network environment.
The Unwinder Interface Port
[4]
is located just below the USB port.
IMPORTANT:
Do NOT connect the printer to the computer, until prompted to do so,
during the printer driver installation process. See “Installing the Printer Software” section.
Before installing the printer software (Toolbox and Driver); you should temporarily
disable all Antivirus programs and Firewalls. In addition; you must be logged onto the
system with full administrative privileges (admin rights).
Minimum Computer System Requirements
•
Windows XP, Windows Vista, Windows 7, Windows 8/8.1. (
Supports 32 and 64
bit systems
)
NOTE:
Win8 and 8.1 will only work in desktop mode. No Win8 metro apps will
be supported (
applications that work in a Win8 only environment
).
•
You must have administrative privileges on the system.
•
Pentium II, 2 GHz minimum (
Pentium Dual Core, 2.5 GHz or better, is optimal
)
•
System memory: 2 GB minimum; or as recommended for your operating system.
•
At least 10 GB free hard-disk space.
•
USB 2.0 or 3.0 port
(ports will be identified as “USB2” or “Enhanced” or “USB 3.0 eXtensible
Host Controller”, in the Device Manager)
•
CD/DVD drive
•
Web Browser: Microsoft Internet Explorer, Firefox, Chrome or Safari
•
Microsoft .Net Framework version 3.5 (
for 32 bit systems
) or Microsoft .Net Framework
version 4 (
for 64 bit systems
) must be installed.
NOTE:
Even if you have a higher .NET Framework version installed; version 3.5 or 4
must also be installed, or the Toolbox will not open.
How to check your system for the minimum system requirements, shown above:
Right click on "My Computer" and select Properties. The system information, including Operating System,
Processor Info and Memory info will be displayed under the "General" tab.
How to check your system for the versions of "Microsoft .NET Framework” installed.
From the Control Panel; open "Add or Remove Programs" and look for "Microsoft .NET Framework 3.5..."
or "Microsoft .NET Framework 4..."in the list.
You can obtain "Microsoft .Net Framework 3.5 or 4" via the Microsoft website.
http://www.microsoft.com
Содержание MACH X
Страница 124: ......
Страница 125: ...Copyright 2015 NEOPOST USA...
