Medrad Veris 8600, Руководство по эксплуатации

Страница: 82 / 226

MEDRAD
Veris
8600
3 —4
PERMANENT SILENCE
• All alarms are silenced, including those at higher levels, until the
permanent silence is ended.
Press and hold the SILENCE key to permanently silence the alarms.
The alarm icon appears in the System Status Line followed by an
infinity symbol. Notice that the long key-press tone occurs after
holding the key in for two seconds, confirming that permanent silence
was selected.
Pressing the SILENCE key a second time ends the silence condition
and normal alarms resume.
Alarms tone warning
(Warning Tone)
During a permanent alarm silence condition, and when this safeguard
is activated, an Alarms tone warning (Warning Tone) occurs when a
new high or medium level alarm is generated. The tone is a low
pitched double beep the same as the long key press tone.
A password is required to turn this function off. The Alarms tone
warning function can be set in the CONFIG menu.
Alarm Volume The alarm volume can be set to levels 1 to 10 with 10 being the
loudest. This can be set in the ALARMS menu.
The alarm volume cannot be set to OFF. To permanently silence the
monitor press and hold the SILENCE key.
NOTE: This function does not change the volume of the audible heart
rate. The pulse tone volume is adjusted separately in the PARAMS
menu.
NOTE: The Alarm Limits menu only displays the parameters present
in the configuration.
Minimum Volume Auto-Reset When the monitor is powered on, the last alarm volume setting
resumes, except when the previous volume setting was 1. In this case
the monitor returns with a volume setting of 2. This function cannot be
disabled.
CAUTION
!
!