Medrad Veris 8600, Руководство по эксплуатации

Страница: 36 / 226

MEDRAD
Veris
8600
2 —2
The Veris monitor can function on AC or battery power. MEDRAD
recommends that batteries be fully charged at all times. If the
batteries are insufficiently charged, battery life is degraded and
shortened. If defective batteries are suspected, contact MEDRAD
Service or your local representative.
Battery Indicators The battery icons are located on the lower portion of the main screen
as described in “Screen Display and Interface” on page 2-5. The
battery icons change color to indicate the status of the batteries and
appear when using DC (battery) or AC (Mains) power.
When AC is connected to the monitor (green light above ON/OFF key
is lit), the battery icon colors are:
Amber: Battery is charging.
Green: Battery is fully charged.
When AC is not connected to the monitor (green light above ON/OFF
key is not lit), the battery icon colors are:
Green: Battery life is greater than 1 hour.
Yellow: Battery is weak. (less than 1 hour and more than 15
minutes of charge remains). A LOW BAT message
also appears.
Black: Battery is nearly drained. (less than 15 minutes of
charge remain). The LOW BAT message remains.
While using battery power there is a short delay between a change in
battery status and the updated display of the battery icons.
If the monitor is currently operating under AC power, the monitor may
take up to two minutes to display a change in battery status.
The monitor also displays the battery status for the ECG module in
the heart rate (HR) parameter box. The battery icon colors are:
Green: Battery life is greater than seven (7) hours.
Yellow: Battery life is less than seven (7) hours. Charge the
module battery soon
Black: This can indicate the ECG module is not connected
to the monitor. Verify the module is connected to the
monitor.
If the module is connected to the monitor, the battery
is drained. ECG module will not operate. Charge the
module battery immediately.