Medrad Veris 8600, Руководство по эксплуатации

Страница: 193 / 226

B-3
Appendix B:Unit and Configuration Defaults
9. To accept the new label name, turn the menu knob to highlight
ACCEPT and press to select. The message Action Completed
appears.
Figure B-2: Set Units Defaults After Modifications
10.Press the menu knob. Your new default set of is saved in
memory.
11.Press the ON/OFF button, located on the front panel, to turn off
the monitor.
Configuration Default Settings 1. From the Set Unit Defaults screen, press and hold the DEFAULT
key again. The Install Configuration Defaults screen displays.
(See Figure B-3: ”Install Configuration Defaults Screen”).
Figure B-3: Install Configuration Defaults Screen
The Install Configuration Defaults screen permits choosing which set
of 3 defaults are available to the user.
Set Unit Defaults
Set current configuration
and alarm settings as new
unit default settings.
CANCEL
SELECT
EDIT
ACCEPT
CUSTOM DEFAULTS
NEW DEFAULT
STD DEFAULTS
STD DEFAULTS
STD DEFAULTS
Install Configuration Defaults
Replace the current set of
configuration defaults with
a different set of defaults.
SELECT
ACCEPT
Base System
Cardiac System
Anesthesia System
CANCEL