Medrad Veris 8600, Руководство по эксплуатации

Страница: 192 / 226

MEDRAD
Veris
8600
B-2
3. Enter the password
MEDRAD
(required to save the customized
default):
• Turn the menu knob to highlight a single letter or number.
• Press the menu knob to select that letter or number.
• Continue for each letter and number of the password.
• After pressing the menu knob for the last figure of the
password, the monitor indicates acceptance of the password
by displaying the Set Unit Defaults window.
4. When the Set Unit Defaults window displays, both SELECT and
CUSTOM DEFAULTS are highlighted.
Figure B-1: Set Unit Defaults Screen
NOTE: Selecting a value in Set Unit Defaults window is different than
other windows. At this point in this procedure, the right column of this
window is active.
5. With both SELECT and CUSTOM DEFAULTS highlighted in the
Set Unit Defaults window, press the menu knob to scroll the
highlight bar down the right-hand column list to the desired
default to be changed. Press to select.
6. Turn the menu knob to scroll the highlight bar to EDIT. Press to
select. The selected default remains highlighted as the menu
knob is rotated. The first letter of the selected default is
highlighted when the menu knob is pressed.
7. Change the label to the new default name by turning the menu
knob to select the first letter in the new name for the default.
Press to select. The next letter is automatically highlighted.
Continue for the remaining letters of the new default name.
8. After completing the last letter of the new name, press the menu
knob until the entire label name is highlighted. This indicates
that entry is complete, but not accepted.
Set Unit Defaults
Replace all configuration
and alarm settings with
unit default settings.
SELECT
EDIT
ACCEPT
CUSTOM DEFAULTS
STD DEFAULTS
STD DEFAULTS
STD DEFAULTS
STD DEFAULTS
CANCEL