Medrad Veris 8600, Руководство по эксплуатации

Страница: 47 / 226

2 —13
2 —Monitor Setup
Keypad There are nine keypad buttons, including the ON/OFF button and the
eight dedicated function keys. Some of the keys have two functions.
The primary function is activated with a momentary press of the key.
A secondary function, if present, is activated when the key is pressed
and held for two seconds.
Key Function
On/Off
Power button. Press to activate the patient monitor
and press and hold to turn the monitor off.
Freeze
A single press of this key freezes all waveforms on
the screen. Numeric data continues to be updated for
monitored parameters.
A second press of this key resumes continuous
waveform display.
N
IBP Cycle/Stat
Press the key momentarily to display the NIBP cycle
popup menu on the screen.
Press and hold this key to begin a Stat measurement.
NIBP
NIBP measurement start key.
Press the key again to cancel an NIBP measurement.
Print
Press once to begin printing or for serial output.
Press a second time to stop printing.
Silence
Press this key momentarily to begin a 2 minute alarm
silence.
Press and hold the key to permanently silence the
alarms.
Press the key again, a second time, to resume
normal alarms.
Default
Press this key momentarily to access custom default
profiles.
Press and hold the key to alter custom default profiles
(password
MEDRAD required).
Trend
Displays the trend table when pressed momentarily.
Press the key to exit the trend window.
While the trend table displays, press and hold to
access the trend settings menu.
Stand By
Press this key momentarily to enter standby mode.
Press the key again to exit the standby mode.
When any of the keys is pressed once, a single audible beep notifies
the user that a primary function has been activated. When a key is
pressed and held a double beep notifies the user that a secondary
function is selected.