MDT Technologies SCN-RTRGS.02, Техническое руководство

Страница: 86 / 110

Technical Manual
Glass Room Temperature Controller Smart SCN-RTRGx.02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263- 880 • knx@mdt.de • www.mdt.de
86
86
4.5.3.5.2 Switch with the Single-button function

Single-button function
The following figure shows the available settings:
Figure 47: Settings – Single-button function: Switch
With the basic function "Switch - Sub-function: switch when button is pressed ", the button sends
the respective fixed value when pressed.
With the "Sub-function -
toggle when button is pressed ", the button sends the respective inverted
value in relation to the last received status value. For this purpose, the status object " Value for
toggle " is connected to the status of the actuator to be controlled. If an ON signal was received as
the last value, the button sends an OFF command the next time it is pressed.
The following table shows the available communication objects:
Number Name/Function
Length Usage
62 Button 1: – Switch 1 Bit Switching function of the button (for sub-function
"Switch when button is pressed").
62 Button 1: – Toggle 1 Bit Toggle function of the button (for sub-function
"Toggle when button is pressed")
63
Button 1: –
Status for toggle
1 Bit Status to update display/symbol on the unit. Must
be connected to the status of the actuator to be
switched (for sub-function "Toggle when button is
pressed").
65
Button 1: –
Status for display
1 Bit Status to update display/symbol on the unit. Must
be connected to the status of the actuator to be
switched (for sub-function "Switch when button is
pressed").
Table 91: Communication objects – Single-button function: Switch
For a description of "Representation on the display", " Button/Object description" and " Lock
object", see chapter
4.5.2 Identical parameters