MDT Technologies SCN-RTRGS.02, Техническое руководство

Страница: 19 / 110

Technical Manual
Glass Room Temperature Controller Smart SCN-RTRGx.02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263- 880 • knx@mdt.de • www.mdt.de
19
19
The following table shows the possible settings:
ETS-Text
Dynamic range
[Default value]
Comment
Behaviour at presence
▪
Display is switched on
▪
Display is switched on and
Standby is exited
Setting the behaviour for a "1"
telegram to the presence object.
Adapt display brightness
to ambience
▪
not active
▪
active
Setting whether the brightness is
dynamically adapted to the
ambience.
Adapt display brightness to ambience : not active
Brightness can be received via
object 91 to synchronize multiple
displays. Fixed text.
For details see description below*.
Brightness at Day 0 – 100%
[100%]
Setting a fixed brightness value in
Day mode.
Brightness at Night 0 – 100%
[50%]
Setting a fixed brightness value in
Night mode.
Adapt display brightness to ambience : active
Send brightness via object
to the bus
▪
not active
▪
active
Setting whether the current display
brightness is sent.
Brightness Brightness level 1 – 10
[Brightness level 8]
Setting the basic brightness of the
display.
Minimum Brightness for
Day 1 – 100 %
[10 %]
Setting of the brightness that
cannot be undercut during
dimming in
“Day” operation.
Minimum Brightness for
Night 1 – 100 %
[3 %]
Setting of the brightness that
cannot be undercut during
dimming in “Night” mode.
Valid for both settings:
Overnight shutdown in
Standby
▪
not active
▪
Threshold 1 (moderately
dark)
▪
Threshold 2 (dark)
▪
Threshold 3 (very dark)
Setting of the display behaviour for
the Night shut-off in Standby
mode.
Table 11: Display settings – Adaption to ambience
With the parameter "
Behaviour at presence " it is possible to switch on the display via an object, for
example, by sending a "1" when motion is detected via a presence/motion detector. It is possible to
select whether the display is only switched on or whether the Standby mode is also exited at the
same time.
Principle of brightness adjustment :
The Glass Room Temperature Controller Smart has an internal brightness sensor and can
dynamically adjust the display brightness to the environment. The "Brightness" parameter
influences the dimming behaviour and the threshold from which the display is dimmed. The
parameter for the minimum brightness defines the absolute lowest threshold up to which the
display is dimmed.