Technical Manual
Glass Room Temperature Controller Smart SCN-RTRGx.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
•
Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
78
78
4.5.3 Buttons 1/2
The two upper buttons on the unit can be configured in the "Button settings" menu either as a
single-button function or as a two-button function.
As a pair of buttons, simple functions such as switching ON/OFF, dimming bright/dark and blind
Up/Down can be set.
As single buttons, several functions are available as internal functions (related to the internal
controller for temperature and ventilation) or external functions. The display for the buttons is in
the lower half of the display.
The following settings are available (example here for the single button function):
Figure 41: Basic settings
–
Buttons 1/2
The following parameters are available for selecting the functions and basic functions:
ETS-Text
Dynamic range
[Default value]
Comment
Function button 1/2
▪
not active
▪
mode selection
(internal connection)
▪
ventilation control direct
operation (internal
connection)
▪
OFF (control value = 0%)
(internal connection)
▪
Heating/Cooling
(internal connection)
▪
external function
Setting only available for the single-
button function.
Setting of the function for button 1 or
button 2.
Basic function
▪
not active
▪
switch
▪
switch/send values
short/long (with 2 objects)
▪
dimming
▪
blinds/shutter
▪
send status
▪
send value
Setting only available for the single-
button function and if function
button 1 or 2 is set to "external
function".
Defines the basic function of the
buttons.
Basic function
▪
switch
▪
dimming
▪
blinds/shutter
Setting only available for the two-
button function.
Defines the function of the buttons.
Table 83: Basic settings
–
Buttons 1/2
