Technical Manual
Glass Room Temperature Controller Smart SCN-RTRGx.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
•
Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
104
104
4.6.2.2 Request external object cyclically
The following picture shows the available setting for each of the active LEDs:
Figure 60: Setting
–
Request external object cyclically
The following table shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Request external object
cyclically
not active
1 min
–
4 h
Setting whether to request and in
which cycle.
Table 114: Setting
–
Request external object cyclically
Important:
This parameter is only shown if the LED reacts to an external object.
On the one hand via the setting "LED reacts to: external object (and button activation)", and on the
other hand by activating the priority object (see previous chapter).
The set time for cyclical sending applies to both objects.
