Technical Manual
Glass Room Temperature Controller Smart SCN-RTRGx.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
•
Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
43
43
4.4.2.6 Comfort extension with time
The comfort extension causes a temporary switching to comfort mode.
The following parameters are available for this:
Figure 16: Settings
–
Comfort extension with time
The following table shows the setting options for this parameter:
ETS-Text
Dynamic range
[Default value]
Comment
Comfort extension with
time
▪
not active
▪
active
Activation of the Comfort extension
via time-dependent object.
Comfort extension time
not active
30 min, 1 h, 1,5 h, 2 h, 2,5 h, 3 h,
3,5 h, 4 h
Adjustable time for Comfort
Extension.
Table 40: Settings
–
Comfort extension with time
If the comfort extension is activated, the following communication object appears:
Number Name/Function
Length Usage
16
Comfort mode
–
Comfort extension
1 Bit
Temporary switching to Comfort mode via object
for the duration of a predefined time
Table 41: Communication object
–
Comfort extension with time
The comfort extension can be used, for example, to ext
end the “Comfort” mode for visits, parties,
etc. If, for example, a timer switches the channel to “Night” mode at a certain time, it can be
switched back to “Comfort” mode for a certain time by means of the Comfort extension. When a “1”
is sent to the obje
ct “Comfort extension”, the channel switches from “Night” mode back to
“Comfort” mode for the set "Comfort extension time". After the "Comfort extension time" has
elapsed, the channel automatically switches back to “Night” mode. If the “Comfort extension”
is to
be ended before the time has expired, this can be achieved by sending a “0” to the object.
If a “1” is sent to the object again during the Comfort extension, the set time is restarted.
If the mode is changed during the extension, the time is stopped.
The Comfort extension only works for switching from “Night” to “Comfort” mode and back!
