Technical Manual
Glass Room Temperature Controller Smart SCN-RTRGx.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
•
Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
71
71
Behaviour on reset
The following parameter defines the behaviour at the initialization of the device:
Figure 34: Ventilation control
–
Behaviour on reset
“Behaviour on reset”
defines the level to be called after a reset if the controller has no value yet.
This can be “automatic mode” or “Levels 0 –
4”.
Sticking protection
The following parameter activates a sticking protection:
Figure 35: Ventilation control
–
Sticking protection
To protect the ventilation from getting stuck, a sticking protection can be activated. This lets the
ventilation run briefly at the highest level if it has not been moved for 24 hours (= level 0).
Priority
The priority can call a certain state:
Figure 36: Ventilation control
–
Priority
When the polarity is set (value = 1), the set state is called up. With "Value 0" the priority is taken
back again.
The following table shows the communication objects for priority control:
Number Name/Function
Length Usage
44
Ventilation control
–
Object priority
1 Bit
Value 1 calls the adjusted level
Table 75: Communication object
–
Ventilation control: Priority