Technical Manual
Glass Room Temperature Controller Smart SCN-RTRGx.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
•
Germany
Phone: +49-2263-
880 • [email protected] • www.mdt.de
77
77
Colour of symbol for …
free selection
[Selection in drop-down field]
Setting the colour for the symbol.
Button labelling left/right
▪
Text entry
▪
Symbol -
▪
▪
Symbol Up
▪
Symbol Down
Defining the button labelling, as a
symbol or text.
Text
Free text
[up to 6 bytes allowed]
Enter the function name for the
left/right button.
Only when "Text entry" is selected.
Display status value as
text under symbol
▪
not active
▪
in percent (%)
Setting whether the status value is to be
displayed in %.
Only for "Dimming"
and " Blind/Shutter".
Table 82: Identical parameter
–
Representation on the display
Single-button function:
Fixed text:
A fixed text is stored here. This remains independent of the status and is displayed
above the symbol.
Text/value by status:
Either a text or a value corresponding to the current status can be
displayed here. For functions with 2 possible states, the text for "ON" or "OFF" is displayed
above the symbol. For functions with 3 possible states, the status can be displayed in percent
(%) below the symbol. To do this, the parameter "Display status value as text under symbol"
must be activated!
Two-button function:
Function name:
A fixed text is stored here. This remains independent of the status and is
displayed centrally above the symbol.
Button labelling left/right
: Both buttons can either be freely labelled or a fixed symbol is
assigned for " /+/Up/Down". Text or symbol appears to the left or right of the buttons.
Display status value as text under symbol
: Here you can determine whether the current status
should be displayed as a percentage value (%) under the symbol.
Display of symbols by status:
Symbols are always displayed. A corresponding symbol can be stored here for each possible status.
This changes according to the status.
Important
: If the status object for a function is not connected, the current switching status is
visualised, otherwise the value of the status object!
