58
Unblock floor operation
Pulling the cord and activating the pick-up spool lever downwards, will lower the floor. Pulling
the cord and activating the pick-up spool lever upwards, will raise the floor back up into the
working position. Releasing the cord returns the diverter valve to neutral, allowing normal
activation of the pick-up reel.
Manual cycle
As the chamber fills, the tailgate starts to open against hydraulic accumulator pressure and
the operator is warned by a series of beeps, to stop forward motion. Pushing the 'Net' button
will now feed net into the chamber where it will be pulled in by the rotating bale, after the pre-
set amount of net is applied the net cutter will trip cutting the net. The tailgate can now be
opened to discharge the netted bale and baling can resume as normal.
Auto cycle
As the chamber fills, the tailgate starts to open against hydraulic accumulator pressure and
the operator is warned by a series of beeps, to stop all forward movement.
The net is automatically fed into the chamber and cut when the pre-determined amount is
applied to the bale. The spool lever can then be operated to open the tailgate and discharge
the bale.
Pushing the net button during the warning beeps will delay the net auto feeding, allowing
more crop into the chamber, while forward motion continues.
To activate the drop floor, pull the cord
towards the tractor, whilst operating the
pick-up spool-valve lever
Cord slack, with lever set at neutral to
operate the pick-up reel
Cord and lever pulled which allows
activation of the drop floor