McHale
F5400
Baler
37
6.3 Care of the net wrapping system
Before operating the machine, ensure that the following procedure is followed to
ensure improved netter operation:
Clean off rubber and metal feed rollers and check for any tacky material
Once roller cleaning is carried out, ensure to apply talcum powder to the
rubber feed roll
6.4 Loading & operating the netter system
The following is the procedure for changing a roll or fitting the first roll:
NOTE: Cleaning solvents
Never use cleaning agents such as benzene, petrol, turpentine oil or
similar cleaning solvents to clean rubber feed roll, otherwise damage
may occur!
McHale
recommend using either of the following:
A cloth soaked in dish washing liquid
Soapy water
WARNING: Lifting full net rolls
Pay attention to the heavy weight of the net roll. It is recommended that
full net rolls should be handled by two people.
1.
Ensure the PTO is disengaged, the
tractor is shut down and ignition key
has been removed.
If changing a roll, remove the empty
cardboard core of the finished net roll
and dispose of responsibly.
Slide the new roll of net onto the net
storage space on the platform.
NOTE:
Ensure that the roll is
orientated in the correct direction.