Mazda CX-7 Navigation System Скачать руководство пользователя страница 181

Страница: 181 / 522

Black plate (181,1)

Tire chains

Install tire chains to the front tires.

Do not use tire chains on the rear
wheels.

Do not drive the vehicle faster than 30
km/h (19 mph) with the tire chains
installed.

Do not drive the vehicle with tire
chains on road conditions other than
snow or ice.

Towing

If the vehicle requires towing, have it
towed with all four wheels completely off
the ground(page 7-19).

Cruise Control

With cruise control, you can set and
automatically maintain any speed of more
than about 30 km/h (19 mph).

WARNING

Do not use the cruise control under the
following conditions:

Using the cruise control under the
following conditions is dangerous
and could result in loss of vehicle
control.

Hilly terrain

Steep inclines

Heavy or unsteady traffic

Slippery or winding roads

Similar restrictions that require
inconsistent speed

Cruise Main Indicator Light
(Amber)/Cruise Set Indicator
Light (Green)

The indicator light has two colors.

Cruise Main Indicator Light (Amber)

The indicator light illuminates amber
when the CRUISE ON switch is pressed
and the cruise control system is activated.

Cruise Set Indicator Light (Green)

The indicator light illuminates green when
a cruising speed has been set.

Driving Your Mazda

Starting and Driving

5-21

CX-7_8CG3-EA-11J_Edition1 Page181
Saturday, September 24 2011 10:32 AM

Form No.8CG3-EA-11J

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Результаты поиска

Содержание CX-7 Navigation System

Отзывы:

Похожие инструкции для CX-7 Navigation System

Бренды по названию

Популярные бренды

Mazda CX-7 Navigation System, Руководство пользователя

Результаты поиска

Содержание CX-7 Navigation System

Отзывы:

Похожие инструкции для CX-7 Navigation System

Бренды по названию

Популярные бренды