Mazda CX-7 Navigation System Скачать руководство пользователя страница 414

Страница: 414 / 522

Black plate (414,1)

NOTE

When closing the engine oil cap, place the cap
with the (

) mark aligned at the OPEN (

)

position and then turn the cap to the CLOSE
(

) position.

2.5-liter engine

1. Be sure the vehicle is on a level

surface.

2. Warm up the engine to normal

operating temperature.

3. Turn it off and wait at least 5 minutes

for the oil to return to the oil pan.

4. Pull out the dipstick, wipe it clean, and

reinsert it fully.

Type A

Full

Low

Type B

Full

Low

5. Pull it out again and examine the level.

The level is normal if it is between
Low and Full. If it is near or below
Low, add enough oil to bring the level
to Full.

CAUTION

Do not add engine oil over Full. This
may cause engine damage.

6. Make sure the O-ring on the dipstick is

positioned properly before reinserting
the dipstick.

7. Reinsert the dipstick fully.

8-22

Maintenance and Care

Owner Maintenance

CX-7_8CG3-EA-11J_Edition1 Page414
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Результаты поиска

Содержание CX-7 Navigation System

Отзывы:

Похожие инструкции для CX-7 Navigation System

Бренды по названию

Популярные бренды

Mazda CX-7 Navigation System, Руководство пользователя

Результаты поиска

Содержание CX-7 Navigation System

Отзывы:

Похожие инструкции для CX-7 Navigation System

Бренды по названию

Популярные бренды