Mazda CX-7 Navigation System Скачать руководство пользователя страница 339

Страница: 339 / 522

Black plate (339,1)

NOTE

The applicable phrase appears in the
display.

(Without 7-inch navigation system)

After user voice registration is completed,
voice guidance

“

Speaker enrollment is

complete

”

is announced.

(With 7-inch navigation system)

After user voice registration is completed,
voice guidance

“

Speaker enrollment is

complete, returning to main menu

”

announced.

Voice recognition learning on/off

1. Press the pick-up button (with/without

7-inch navigation system) or talk
button with a short press (without 7-
inch navigation system) or a long press
(with 7-inch navigation system).

NOTE

For vehicles with the 7-inch navigation system,
you can also press the talk button with a short
press and say: [Beep]

“

Telephone

”

“

Phone

”

Say:

[Beep]

“

Voice training

”

Prompt:

“

Enrollment is enabled/

disabled. Would you like to disable/
enable or retrain?

”

Say:

[Beep]

“

Disable

”

“

Enable

”

5. When

“

Disable

”

is spoken, the voice

recognition learning is turned off.
When

“

Enable

”

is spoken, the voice

recognition learning is turned on.

(Without 7-inch navigation system)
Prompt:

“

Speaker Enrollment is

disabled/enabled.

”

(With 7-inch navigation system)
Prompt:

“

Speaker Enrollment is

disabled/enabled, returning to main
menu.

”

When Bluetooth® Hands-
Free Cannot be Used

Bluetooth

Hands-Free cannot be used

under the following conditions:

The device is outside of the
communication area.

The device has a malfunction.

The device is not connected to the
hands-free unit equipped on the
vehicle.

The device's battery is weak.

The device is turned off.

The device is placed where radio
reception is difficult.

The ignition is switched off.

Interior Comfort

Bluetooth® Hands-Free

6-101

CX-7_8CG3-EA-11J_Edition1 Page339
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Результаты поиска

Содержание CX-7 Navigation System

Отзывы:

Mazda CX-7 Navigation System, Руководство пользователя, Страница: 339 / 522

Результаты поиска

Содержание CX-7 Navigation System

Отзывы: