Mazda CX-7 Navigation System Скачать руководство пользователя страница 186 | Manualshive

Страница: 186 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 186

Black plate (186,1)

q

TCS OFF Indicator Light

This indicator light stays on for a few
seconds when the ignition is switched
ON.
It also illuminates when the TCS OFF
switch is pressed and TCS is switched off.
Refer to TCS OFF Switch on page 5-27.
If the light remains illuminated and the
TCS is not switched off, take your vehicle
to an Authorized Mazda Dealer. The
dynamic stability control may have a
malfunction.

NOTE

If the battery is disconnected or a fuse is
replaced, the DSC will be inoperable. When
this happens, the TCS OFF indicator light
flashes and the TCS/DSC indicator light
illuminates.
To reactivate the DSC, perform the following
procedure with the battery connected.

1. Switch the ignition ON.

2. Turn the steering clockwise fully, then turn

it counterclockwise fully.

3. Make sure the TCS OFF indicator light

turns off.

4. Switch the ignition off, then switch the

ignition ON again.

5. Make sure the TCS/DSC indicator light

turns off.

If the TCS/DSC indicator light and the TCS
OFF indicator light remain illuminated even
after switching the ignition from ON to OFF,
and back to ON, attempt the procedure again.
If this still does not resolve the issue, consult
an Authorized Mazda Dealer.

5-26

Driving Your Mazda

Starting and Driving

CX-7_8CG3-EA-11J_Edition1 Page186
Saturday, September 24 2011 10:32 AM

Form No.8CG3-EA-11J

«
...
184
185
186
187
188
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов