Mazda CX-7 Navigation System Скачать руководство пользователя страница 156 | Manualshive

Страница: 156 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 156

Black plate (156,1)

WARNING

Always make sure the trailer hitch is securely attached before departure:

An unsecured trailer hitch is dangerous as it causes greater trailer sway from
crosswinds, rough roads or other causes, resulting in loss of control and a serious
accident.
Examine all trailer-hitch mounting bolts regularly and tighten any that are loose. If
the hitch is removed, seal any open mounting holes to prevent exhaust, dust, water,
dirt and other foreign elements from filtering in, possibly endangering personal
safety and damaging your vehicle.
Do not install a hitch that stiffens the bumper as it will reduce the bumper's
performance.

Make sure there are no exhaust gas leaks into the passenger compartment if any
mounting bolts are connected to the body:

Modifying your vehicle exhaust system is dangerous. Exhaust gas entering the
vehicle could cause loss of consciousness or even death.
When mounting the trailer hitch, make no modifications to the vehicle exhaust
system.

CAUTION

Ø

Make all hitch adjustments with actual loads. Do not load and unload vehicle
while adjusting hitch. This action will change the vehicle height.

Ø

Do not use an axle-mounted hitch. This may damage the axle and related parts.

q

Tires

When towing a trailer, make sure all tires are inflated to the recommended cold-tire
pressure, as indicated on the tire pressure chart on the driver's door frame. Trailer tire size,
load rating, and inflation pressures should conform to tire manufacturer specifications.

WARNING

Never use the temporary spare tire when towing:

Using the temporary spare tire on your vehicle when towing a trailer is dangerous as
it could result in tire failure, loss of control, and injury to vehicle occupants.

4-18

Before Driving Your Mazda

Towing

CX-7_8CG3-EA-11J_Edition1 Page156
Saturday, September 24 2011 10:32 AM

Form No.8CG3-EA-11J

«
...
154
155
156
157
158
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов