Mazda CX-7 Navigation System Скачать руководство пользователя страница 291 | Manualshive

Страница: 291 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 291

Black plate (291,1)

q

Error Indications

If you see an error indication on the display, find the cause in the chart. If you cannot clear
the error indication, take the vehicle to an Authorized Mazda Dealer.

Indication

Cause

Solution

ACQUIRING

Depending on the
surrounding conditions
(such as large trees, build-
ings, or tunnels) and special
weather conditions,
SIRIUS radio reception
may be diminished or
temporarily interrupted.

Improve reception by moving away from possible
obstructions. If the error indication continues to display,
consult an Authorized Mazda Dealer.

ANTENNA FAIL

Satellite radio antenna
malfunction

Check the satellite radio antenna, antenna cable and
DLP antenna connector. If the error indication continues
to display, consult an Authorized Mazda Dealer.

CHECK CD

CD is inserted upside down

Insert the CD properly. If the error indication continues
to display, consult an Authorized Mazda Dealer.

CD is defective

Insert another CD properly. If the error indication
continues to display, consult an Authorized Mazda
Dealer.

NOTE

If a broken DLP* unit is replaced with a new unit, cancel the license for the broken unit and make
sure to carry out new registration for the replaced unit. If the license for the broken unit is not
canceled, you will be charged a reception fee for both units.

* DLP: Down Link Processor (SATELLITE RADIO Module)

Interior Comfort

Audio System

6-53

CX-7_8CG3-EA-11J_Edition1 Page291
Saturday, September 24 2011 10:33 AM

Form No.8CG3-EA-11J

«
...
289
290
291
292
293
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов