Mazda CX-7 Navigation System Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 522

background image

Black plate (22,1)

q

Split-Folding Rear Seatback

The seatbacks can be folded down to
provide more space in the luggage
compartment.

To fold down the seatbacks

WARNING

Always remove the child-restraint
system from the rear seat before
operating the remote handle levers for
the rear seat:

Operating (pulling) the remote
handle levers while a rear-facing
child-restraint system is in the rear
seat is dangerous. It could cause
injury to a child seated in the child-
restraint system when the seatback
suddenly flips forward.

Make sure there is nobody in the rear
seat area before operating (pulling) the
remote handle levers:

Not checking the rear seat area for
persons before folding the seatbacks
down with the remote handle levers
is dangerous. The rear seat area is
difficult to see from the rear of the
vehicle. Operating (pulling) the
remote handle levers without
checking could cause injury to a
person when a seatback suddenly
flips forward.

CAUTION

Before folding the seatbacks down
with the remote handle levers, make
sure there is no cup in a rear cup
holder. Folding the seatbacks with
the remote handle levers while a cup
is in the cup holder could soil or
damage the seat bottom and
seatback.

When using the remote handle levers:

CAUTION

Be careful of the following when
using the remote handle levers:

Ø

On a downward slope, the
seatback could flip forward faster
than on a flat surface.

Ø

On an upward slope, the seatback
may not fold down. When the
seatbacks cannot be folded down
with levers, pull the rear seatback
forward from inside the vehicle.

1. Unfasten the lap portion of the center-

rear seat belt (page 2-23).

CAUTION

Always unfasten the lap portion of
the belt before folding left-rear
seatback. Leaving the lap portion of
the belt fastened could cause
damage to the seat belt, buckle and
seatback.

2. After checking that the rear seats are

clear, open the liftgate compartment
and pull the remote handle levers on
the left and right sides of the liftgate
compartment.

2-10

Essential Safety Equipment

Seats

CX-7_8CG3-EA-11J_Edition1 Page22
Saturday, September 24 2011 10:31 AM

Form No.8CG3-EA-11J

«
...
20
21
22
23
24
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CX-7 Navigation System

Бренд: IAME Страницы: 17

V2 SUPERCHARGER

Бренд: Tesla Страницы: 9

Бренд: Ford Страницы: 2

Бренд: Thule Страницы: 8

Lippert Components LEVELEGS MPD 66385

Бренд: Atwood Страницы: 6

65 41 2 152 528

Бренд: BMW Страницы: 21

Бренд: Dacia Страницы: 238

Бренд: Actia Страницы: 102

Бренд: Hummer Страницы: 502

Бренд: KEKO Страницы: 3

Бренд: Movon Страницы: 43

nERGY ETSA200R-PA

Бренд: Soundoff Signal Страницы: 3

Бренд: Truma Страницы: 10

Бренд: Westin Страницы: 3

Бренд: Audi Страницы: 4

Бренд: Thule Страницы: 15

Бренд: Buick Страницы: 394

WG Grand Cherokee 2002

Бренд: Jeep Страницы: 74

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды