Mazda CX-7 Navigation System Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 522

Mazda CX-7 Navigation System Скачать руководство пользователя страница 35

Black plate (35,1)

q

Air Bag/Front Seat Belt
Pretensioner System Warning Beep

If a malfunction is detected in the air bag/
front seat belt pretensioner systems and
the warning light, a warning beep sound
will be heard for about 5 seconds every
minute.

The air bag and seat belt pretensioner
system warning beep sound will continue
to be heard for approximately 35 minutes.
Have your vehicle inspected at an
Authorized Mazda Dealer as soon as
possible.

WARNING

Do not drive the vehicle with the air
bag/front seat belt pretensioner system
warning beep sounding:

Driving the vehicle with the air bag/
front seat belt pretensioner system
warning beep sounding is dangerous.
In a collision, the air bags and the
front seat belt pretensioner system
will not deploy and this could result
in death or serious injury.
Contact an Authorized Mazda Dealer
to have the vehicle inspected as soon
as possible.

Center-Rear Position Seat
Belt

Before using the center-rear lap/shoulder
belt make sure tongue (A) and anchor
buckle (B) are fastened.

(B)

(A)

q

Fastening the Seat Belt

1. Grasp the seat belt tongue (C).

2. Slowly pull out the lap/shoulder belt.

3. Insert the seat belt tongue (C) into the

seat belt buckle (D) until you hear a
click sound.

(A)

(B)

(C)

(D)

Essential Safety Equipment

Seat Belt Systems

2-23

CX-7_8CG3-EA-11J_Edition1 Page35
Saturday, September 24 2011 10:31 AM

Form No.8CG3-EA-11J

«
...
33
34
35
36
37
...
»

Содержание CX-7 Navigation System











































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов